|
Automobile Chassis & Vehicle Dynamic |
|
|
INFLUENCE OF COMPLIANCE FOR AN ELASTOKINEMATIC MODEL OF A PROPOSED REAR SUSPENSION
M. TIC, G. DOBRE, V. MATEESCU, G. VIRZI-MARIOTTI
Int J Automot Technol. 2014;15(6):885-891. DOI: https://doi.org/10.1007/s12239-014-0093-8
 
|
Cited By 7 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
PREDICTION PROCEDURE FOR WEAR DISTRIBUTION OF TRANSIENT ROLLING TIRE
S. G. ZUO, T. X. NI, X. D. WU, K. WU, X. W. YANG
Int J Automot Technol. 2014;15(3):505-515. DOI: https://doi.org/10.1007/s12239-014-0053-3
|
|
Cited By 13 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
DISCERNING THE OPERATIONAL STATE OF A VEHECLE’S DISTRIBUTED ELECTRONIC SYSTEMS FROM VEHICLE NETWORK TRAFFIC FOR USE AS A FAULT DETECTION AND DIAGNOSIS TOOL
J. E. TAYLOR, M. AMOR-SEGAN, G. DHADYALLA, R. P. JONES
Int J Automot Technol. 2014;15(3):441-449. DOI: https://doi.org/10.1007/s12239-014-0046-2
|
|
Cited By 5 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
OBJECTIVE EVALUATION OF HUMAN PERCEPTION OF AUTOMOTIVE SOUND BASED ON PHYSIOLOGICAL SIGNAL OF HUMAN BRAIN
S. M. LEE, S. K. LEE
Int J Automot Technol. 2014;15(2):273-282. DOI: https://doi.org/10.1007/s12239-014-0028-4
|
|
Cited By 23 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
ANALYSIS OF THE PERFORMANCE OF THE EVAPORATOR OF AUTOMOTIVE AIR CONDITIONING SYSTEM
C. C. SHEN, J. H. LU
Int J Automot Technol. 2014;15(1):19-38. DOI: https://doi.org/10.1007/s12239-014-0003-0
|
|
Cited By 7 |
|
|
|
|
|
Automobile Electronics |
|
|
HEURISTIC RESOURCE ALLOCATION AND SCHEDULING METHOD FOR DISTRIBUTED AUTOMOTIVE CONTROL SYSTEMS
J. YOUN
Int J Automot Technol. 2013;14(4):611-624. DOI: https://doi.org/10.1007/s12239-013-0066-3
|
|
Cited By 11 |
|
|
|
|
|
Automobile Body and Safety |
|
|
APPLICATION OF WARM FORMING ALUMINUM ALLOY PARTS FOR AUTOMOTIVE BODY BASED ON IMPACT
H. T. SUN
Int J Automot Technol. 2013;14(4):605-610. DOI: https://doi.org/10.1007/s12239-013-0065-4
|
|
Cited By 29 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
COMPUTATIONAL AND EXPERIMENTAL INVESTIGATION OF THE UNSTEADY FLOW STRUCTURES AROUND AUTOMOTIVE OUTSIDE REAR-VIEW MIRRORS
B. KHALIGHI, K.-H. CHEN, J. P. JOHNSON, A. SNEGIREV, J. SHINDER, S. LUPULEAC
Int J Automot Technol. 2013;14(1):143-150. DOI: https://doi.org/10.1007/s12239-013-0016-0
|
|
Cited By 14 |
|
|
|
|
|
Automobile Electronics |
|
|
TECHNOLOGY ANALYSIS AND LOW-COST DESIGN OF AUTOMOTIVE RADAR FOR ADAPTIVE CRUISE CONTROL SYSTEM
S. H. JEONG, J. E. LEE, S. U. CHOI, J. N. OH, K. H. LEE
Int J Automot Technol. 2012;13(7):1133-1140. DOI: https://doi.org/10.1007/s12239-012-0116-2
|
|
Cited By 19 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
RELATIONSHIP BETWEEN LEAN SIX SIGMA, ENVIRONMENTAL MANAGEMENT SYSTEMS, AND ORGANIZATIONAL PERFORMANCE IN THE MALAYSIAN AUTOMOTIVE INDUSTRY
N. F. HABIDIN, S. M. YUSOF
Int J Automot Technol. 2012;13(7):1119-1125. DOI: https://doi.org/10.1007/s12239-012-0114-4
|
|
Cited By 55 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
SIMULATION OF THE VERTICAL BENDING FATIGUE TEST OF A FIVE-LINK REAR AXLE HOUSING
X. WANG, W. XU, Y. HUANG, M. ZHONG, H. FAN
Int J Automot Technol. 2012;13(6):923-932. DOI: https://doi.org/10.1007/s12239-012-0093-5
|
|
Cited By 6 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
AERODYNAMIC DESIGN OPTIMIZATION OF REAR BODY SHAPES OF A SEDAN FOR DRAG REDUCTION
K. S. SONG, S. O. KANG, S. O. JUN, H. I. PARK, J. D. KEE, K. H. KIM, D. H. LEE
Int J Automot Technol. 2012;13(6):905-914. DOI: https://doi.org/10.1007/s12239-012-0091-7
|
|
Cited By 46 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
NEW LEAD-ACID BATTERY MANAGEMENT SYSTEM BASED ON GENERATOR REGULATION
G. Y. ZHANG, X. W. ZHAO, J. X. QIANG, F. TIAN, L. YANG
Int J Automot Technol. 2012;13(4):679-686. DOI: https://doi.org/10.1007/s12239-012-0066-8
|
|
Cited By 4 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
NUMERICAL INVESTIGATION ON THE DYNAMIC CHARACTERISTICS OF AN AUTOMOTIVE A/C HOSE
C. WIJAYA
Int J Automot Technol. 2012;13(3):433-440. DOI: https://doi.org/10.1007/s12239-012-0040-5
|
|
Cited By 4 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
VIABLE COMBINED CYCLE DESIGN FOR AUTOMOTIVE APPLICATIONS
K.-B. KIM, K.-W. CHOI, K.-H. LEE
Int J Automot Technol. 2012;13(3):401-407. DOI: https://doi.org/10.1007/s12239-012-0037-0
|
|
Cited By 4 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
A NOVEL ADAPTIVE ALGORITHM WITH AN IIR FILTER AND A VARIABLE STEP SIZE FOR ACTIVE NOISE CONTROL IN A SHORT DUCT
J. H. PARK, Sang-Kwon Lee
Int J Automot Technol. 2012;13(2):223-229. DOI: https://doi.org/10.1007/s12239-012-0019-2
|
|
Cited By 20 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
SMOOTH MOTION CONTROL OF THE ADAPTIVE CRUISE CONTROL SYSTEM BY A VIRTUAL LEAD VEHICLE
S. G. KIM, M. TOMIZUKA, K. H. CHENG
Int J Automot Technol. 2012;13(1):77-85. DOI: https://doi.org/10.1007/s12239-012-0007-6
|
|
Cited By 26 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
OPTIMIZATION AND DESIGN OF DISK-TYPE MR BRAKES
B. ASSADSANGABI, F. DANESHMAND, N. VAHDATI, M. EGHTESAD, Y. BAZARGAN-LARI
Int J Automot Technol. 2011;12(6):921-932. DOI: https://doi.org/10.1007/s12239-011-0105-x
|
|
Cited By 59 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
APPROACH TO ASSESS A FAST WELDING SIMULATION IN AN INDUSTRIAL ENVIRONMENT - APPLICATION FOR AN AUTOMOTIVE WELDED PART
W. PERRET, R. THATER, U. ALBER, C. SCHWENK, M. RETHMEIER
Int J Automot Technol. 2011;12(6):895-901. DOI: https://doi.org/10.1007/s12239-011-0102-0
|
|
Cited By 17 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
REDUCING THE MEMORY FOOTPRINT OF OSEK-BASED SYSTEMS VIA STACK SHARING AND LIGHT-WEIGHT READY QUEUES
D. PARK, J. YOO, J. PARK, S. HONG
Int J Automot Technol. 2011;12(3):451-460. DOI: https://doi.org/10.1007/s12239-011-0053-5
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
TORQUE-BASED OPTIMAL VEHICLE SPEED CONTROL
M. HONG, M. OUYANG, T. SHEN
Int J Automot Technol. 2011;12(1):45-49. DOI: https://doi.org/10.1007/s12239-011-0006-z
|
|
Cited By 13 |
|
|
|
|
|
Automobile Electronics |
|
|
ANALYSIS OF AN AUTOMOTIVE GROUND SYSTEM BASED ON ITS STEADY-STATE MODEL
H. LIM, D. LEE, S. S. OK, J. H. PARK
Int J Automot Technol. 2010;11(6):865-871. DOI: https://doi.org/10.1007/s12239-010-0103-4
|
|
|
|
|
Automobile Body and Safety |
|
|
SOLUTION FOR FAILURE ANALYSIS OF AUTOMOTIVE AXLE KNUCKLE PULL-OUT
K. BAYNAL1, M. MAKARACI2, K. GULBUDAK
Int J Automot Technol. 2010;11(5):701-710. DOI: https://doi.org/10.1007/s12239-010-0083-4
|
|
Cited By 6 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
DEVELOPMENT OF AN ELECTRIC MOTOR-DRIVEN PUMP UNIT FOR ELECTRO-HYDRAULIC POWER STEERING WITH 42V POWER-NET
J. HUR
Int J Automot Technol. 2010;11(4):593-600. DOI: https://doi.org/10.1007/s12239-010-0071-8
|
|
Cited By 13 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
IMPROVED METHOD FOR ANALYZING AUTOMOTIVE TRANSMISSION PARTS (SHAFT/GEAR) MANUFACTURED USING THE WARM SHRINK FITTING PROCESS
T. J. KIM, H. Y. KIM, B. C. HWANG, H. J. KANG, C. KIM
Int J Automot Technol. 2009;10(5):611-618.
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
PERFORMANCE OF AIR CONDITIONERS WITH A GAS-LIQUID SEPARATION CONDENSER AND ONE-TANK LAMINATED EVAPORATOR
S.-Y. YOO, D.-W. LEE, M.-S. JIE
Int J Automot Technol. 2009;10(5):555-560.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
VIBRATIONAL CHARACTERISTICS OF AUTOMOTIVE TRANSMISSION
H. W. LEE, S. H. PARK, M. W. PARK, N. G. PARK
Int J Automot Technol. 2009;10(4):459-467.
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
EXPERIMENTAL STUDY ON PERFORMANCE OF AUTOMOTIVE AIR CONDITIONING SYSTEM USING R-152a REFRIGERANT
S.-Y. YOO, D.-W. LEE
Int J Automot Technol. 2009;10(3):313-320.
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
INTERIOR SOUND FIELD REFINEMENT OF A PASSENGER CAR USING MODIFIED PANEL ACOUSTIC CONTRIBUTION ANALYSIS
X. HAN, Y.-J. GUO, H.-D. YU, P. ZHU
Int J Automot Technol. 2009;10(1):79-85.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
ERGONOMIC AND BIOMECHNICAL ANALYSIS OF AUTOMOTIVE GENERAL ASSEMBLY USING XML AND DIGITAL HUMAN MODELS
Y. H. RIM, J. H. Mun, G. Y. KIM, S. D. NOH
Int J Automot Technol. 2008;9(6):719-728.
|
|
|
|
> Browse Articles > Search
